The following articles have been placed on our site by vistors to Plastics News International. Some of these stories will be selected for our print version.
If you have news relevant to plastics you are invited to submit it here. It will only take you a few minutes to enter your information.
Please note we do not take responsibility for the content and or the accuracy of news placed in this file and we reserve the right to delete any submissions without explanation or notice.
The DYMAX BlueWaveTM 200 UV curing spot lamp from Intertronics already
offers the highest intensity and the most user-friendly operation in the
industry. Now a new, patent pending Intensity Adjustment feature allows
simple, manual intensity adjustment during initial UV process validation
and production. This major new feature not only enables consistant
process timing, but also ensures consistant quality of adhesive curing.
The improved predictability of bonding thus leading to higher quality and
lower reject rates.
As with any manufacturing process, defining an acceptable processing
window is a crucial step in developing a UV curing process. The new
Intensity Adjustment feature permits engineers to evaluate the full range
of intensity produced by the BlueWave 200 spot lamp, from 0 to 100% Thus,
the upper and lower intensity limits of a UV curing process can easily be
identified in an actual production setting. When in production, routine
radiometer measurements performed in accordance with Good Manufacturing
Practices will determine if any further intensity adjustments are
required. The average BlueWave 200 bulb varies less than 1% over 8 hours
of normal use, so daily or weekly adjustments are typically adequate to
maintain a tightly controlled process.
The BlueWave 200 primarily emits UVA and blue visible light (300-450 nm)
and is designed for UV curing of adhesives, coatings, and encapsulants.
It contains an integral shutter which can be actuated by a foot pedal or
PLC making it ideal for both manual and automated processes. A solid-
state power supply provides consistent performance at any voltage (90-263
volts, 47-63 Hz). Intertronics also offers a wide array of Dymax long-
lasting lightguides including liquid/fibre, single-multi-pole, and
lightguides of various lengths. Further information regarding
Intertronics’ products can be found at www.intertronics.co.uk
Cover Story Material selection for plastic design.
Major Focus
Automotive applications.
Electrical and electronic applications.
Articles
Automated production of PUR/ honeycomb core components.
New study: strong growth in the PP market.
Consumers put at risk by campaign against BFRs.
Advertisers
Due to the increasing profile of PLASTICS NEWS INTERNATIONAL in the South East Asia and Pacific region exciting advertising opportunities are presented by our access to key industry decision makers in this rapidly changing market..
Do you like this web site...then 
